21
INSIDE OF OVEN
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water.
Suitable proprietary chemical cleaners may be used after first consulting with the
manufacturers recommendations and testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity surface.
NOTE:
The manufacturers of this appliance will accept no responsibility for damage caused
by chemical or abrasive cleaning.
Let the oven cool down and pay special attention no to touch the hot heating
elements inside the oven cavity.
OVEN FITTING OUT
•
Assemble the wire racks on the oven
walls using the 2 screws (fig. 4.1a).
•
Slide in, on the guides, the shelf and the
tray (fig. 4.1b).
The rack must be fitted so that the
safety notch, which stops it sliding out,
faces the inside of the oven; the guard
rail shall be at the back.
•
To dismantle, operate in reverse order.
Fig. 4.1a
Fig. 4.1b
Guard rail
Stop notch
