
8
Installation instructions
Fastening the installation brackets
Each cooktop is provided with an installation kit including brackets and screws for fastening
the cooktop to benches from 20 to 40 mm thick.
1
Remove the pan supports and burners from the cooktop.
2
Turn the cooktop upside down and place it on a soft surface.
3
Fasten the brackets “A” to the appropriate socket holes, without tightening the screws “B” for the
moment.
Fastening the cooktop
1
Spread the sealing material “C” out along the edge of the cutout, making sure that the
junctions overlap at the corners.
2
Insert the cooktop into the cutout and position it correctly.
3
Adjust the position of the brackets “A” and tighten screws “B” to secure the cooktop firmly in
position (teeth “D” of the brackets should go into the holes).
4
Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the
cooktop. Take care not to damage the workbench.
Fig. 5 Fastening the cooktop
20 mm min.
40 mm max.
B
D
C
A
D
Fig. 4 Fastening the installation brackets
A
B
B
B
B
A
A
A
B
B
B
B
A
A
A
A
CG302L
CG302L
CG604L
CG604L
Summary of Contents for CG302L
Page 1: ...NZ AU Installation instructions and User guide Gas cooktops CG302L and CG604L models...
Page 2: ......
Page 27: ......