©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 15
©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 16
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to create unique programs tailored to
your individual needs.
1. The TVL3000-II WW/CW have one DMX channel, and the
TVL3000-II DW has 2 DMX Channels Modes; Mode 1 is a 2
Channel Mode, and Mode 2 is a 2 Channel Mode. For the DMX
modes, values, and traits, see page 17.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
This will allow you to create your own programs.
4. Follow the instructions on page 9 to set the DMX address.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
Dimmer Mode:
This mode allows the user to adjust the dimming so
that you can manually set your desired color output.
1. Press the MENU button until “
DIMM
” is displayed, and press
ENTER.
2. Use the UP and DOWN buttons to adjust the intensity until you
reach your desired intensity.
3. Once you have found your desired intenstiy, press ENTER, then
press and hold the MENU button to activate.
Color Temperature Mode (TVL3000-II DW only):
This mode
allows the user to select their desired Color Temperature output.
1. Press the MENU button until “
CTND
” is displayed, and press
ENTER.
2. Use the UP or DOWN buttons to scroll through the different color
temperatures.
3. Once you have found your color temperature, press ENTER, then
press and hold the MENU button to activate.
TVL3000-II WW/CW/DW Operating Modes
TVL3000-II WW/CW/DW System Menu
3. Press ENTER to confirm. To make the LED display reappear,
press and button.
DISP
-
In this submenu your are able to “flip” the display
180º.
1. Press the MENU button until “
DISP
” is displayed, press
ENTER.
2. Press the UP button to select “
ON
” to reverse the display, or
“
OFF
” to reverse it back.
3. Press ENTER to confirm.
FHRS
- In this submenu the display will show the running
time (in hours) of the unit.
1. Press the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The display shows the life time of the unit. Press MENU to
exit.
VER
- In this submenu are see the Software version of the
unit.
1. Press the MENU button until “
VER
” is displayed, press
ENTER.
2. The display will show the software version.
