background image

©Elation Professionals®  -  www.elationlighting.com  - TVL3000-II WW/CW/DW User Manual Page 2

  TVL3000-II WW/CW/DW         

                General Information

Unpacking: 

Thank you for purchasing either the TVL3000-II WW, 

TVL3000-II CW, or TVL3000-II DW by Elation Professionals

®

. Every 

TVL3000-II WW, TVL3000-II CW, and TVL3000-II DW has been 

thoroughly tested and has been shipped in perfect operating condi-

tion. Carefully check the shipping carton for damage that may have 

occurred during shipping. If the carton appears to be damaged, care-

fully inspect your fixture for any damage and be sure all equipment 

necessary to operate the unit has arrived intact. In the event damage 

has been found or parts are missing, please contact our toll free cus-

tomer support number for further instructions. Please do not return 

this unit to your dealer without contacting customer support first. 

Introduction: 

The TVL3000-II WW, TVL3000-II CW, and TVL3000-II 

DW are DMX intelligent LED fixture’s. The TVL3000-II WW & TVL3000-

II CW have 1 DMX channel, while the TVL3000-II DW has 2 DMX 

channel modes; Mode 1 is 2 DMX Channels and Mode 2 is 2 DMX 

Channels. These fixture’s have two operating modes; manual mode or 

DMX controlled. The TVL3000-II WW, TVL3000-II CW, and TVL3000-II 

DW can only be run as stand alone unit. The light projections can be 

enhanced using fog or special effects smoke. 

Customer Support:

 Elation Professionals

®

 provides a toll free cus-

tomer support line, to provide help and to answer any question should 

you encounter problems during your set up or initial operation. You 

may also visit us on the web at www.elationlighting.com for any com-

ments or suggestions. Service Hours are Monday through Friday 8:00 

a.m. to 4:30 p.m. Pacific Standard Time.

 

Voice:   

(323) 582-3322

 

Fax:    

(323) 832-9142

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.elationlighting.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

User Instructions

TVL3000-II WW/CW/DW

  4/12

Summary of Contents for TVL3000-II CW













Reviews: