background image

 
 

w w w . e l a t i o n l i g h t i n g . c o m  

 

 

w w w . e l a t i o n l i g h t i n g . c o m  

 

                                                                                              2

                                                 

SNIPER PRO™ User Manual 

©2016  ELATION  PROFESSIONAL

  all  rights  reserved.  Information,  specifications, 

diagrams,  images,  and  instructions  herein  are  subject  to  change  without  notice.   

ELATION  PROFESSIONAL  logo  and  identifying  product  names  and  numbers  herein 
are trademarks of ELATION PROFESSIONAL.    Copyright protection claimed includes 

all  forms  and  matters  of  copyrightable  materials  and  information  now  allowed  by 
statutory  or  judicial  law  or  hereinafter  granted.    Product  names  used  in  this 

document  may  be  trademarks  or  registered  trademarks  of  their  respective 

companies and are hereby acknowledged.    All non-ELATION brands and product 
names are trademarks or registered trademarks of their respective companies. 

 

ELATION  PROFESSIONAL

  and  all  affiliated  companies  hereby  disclaim  any  and  all 

liabilities for property, equipment, building, and electrical damages, injuries to any 

persons, and direct or indirect economic loss associated with the use or reliance of 
any information contained within this document, and/or as a result of the improper, 

unsafe,  insufficient  and  negligent  assembly,  installation,  rigging,  and  operation  of 
this product. 

 

Elation Professional USA | 

6122 S. Eastern Ave. 

Los Angeles, CA. 90040 

323-582-3322 

|

 323-832-9142 fax

 |

 

www.elationlighting.com 

|

 [email protected]

 

 

Elation Professional B.V

Junostraat 2 

6468 EW Kerkrade, The Netherlands 

+31 45 546 85 66 

|

 +31 45 546 85 96 fax

 

|

 

www.elationlighting.eu 

|

 [email protected]

 

 

D O C U M E N T   V E R S I O N  

Please check 

www.elationlighting.com

 

for the latest revision/update of this manual. 

 

Date 

Document 

Version 

Software 

Version 

 

DMX 

Channel 

Modes 

Notes 

7/6/16 

A: 1.0 | Ab:1.0 
B: 1.0 | Bb:1.0 
C: 1.0 | Cb:1.0 
D: 1.0 | Db:1.0 

25 / 27 

Added 27CH mode. 

12/20/16 

A: 1.0 | Ab:1.1 
B: 1.0 | Bb:1.1 
C: 1.0 | Cb:1.1 
D: 1.0 | Db:1.1 

25 / 27 

Updated DMX traits. 

 

 

 

Summary of Contents for SNIPER PRO





































Reviews: