10
or abort this menu is to turn the power off. You can also call this menu on power up by pressing and
holding “menu” and “erase” together while turning on the power.
LOCK/UNLOCK MEMORY (hidden)
This is one of the hidden menus that can only be selected while holding the “add” switch when cycling
through the menu selections. This feature allows you to lock the memory to prevent someone from
changing or erasing anything that has been recorded. The message “MEMORY LOCKED, CAN’T
RECORD” will appear if the memory is locked and anyone presses the record switch. All other menu
items will also be locked out in order to protect the memory.
To lock or unlock the memory from this menu, use the + and - switches or data wheel #1 to select the
desired state, then press “enter”.
ERASE ALL MEMORY (hidden)
This is another one of the hidden menus that can only be selected while holding the “add” switch when
cycling through the menu selections. This menu allows you to clear the entire memory of the Show
Designer 3. This erases the scene, preset, chase and show data as well as the system parameters such as
fixture assignments. The message “This will erase the entire memory. To erase, hold yes for 5 seconds” will
appear in the display. Press and hold “yes” until the system reboots or press “no” to exit.
Summary of Contents for show designer 3
Page 1: ...Software Revision 1 12...