2 8
S Y S T E M
M E N U
EDIT PROGRAM - Record Controller - Working With Built - In Programs
A Primary unit can send up to 3 different data groups to the Secondary units, i.e. a Primary unit
can start 3 different Secondary units, which run 3 different programs. The Primary unit sends
the 3 program parts in a continuous loop.
The Secondary unit receives data from the Primary unit according to the group which the
Secondary unit was assigned to. If e.g. a Secondary unit is set to “Secondary 1” in the menu
“Set to Secondary”, the Primary unit sends “Auto Program Part 1” to the Secondary unit. If
set to “Secondary 2”, the Secondary unit receives “Auto Program Part 2”.
To start an Auto Program proceed as follows:
1. Secondary Setting
•
Select “Function Mode”.
•
Press ENTER to confirm.
•
Select “Set to Secondary”.
•
Press ENTER to confirm.
•
Select “Secondary 1”, “Secondary 2” or “Secondary 3”.
•
Press ENTER to confirm.
•
Press MODE/ESC in order to return to the main menu.
2. Automatic Program Run
•
Select “Function Mode”.
•
Press ENTER to confirm.
•
Select “Auto Program”.
•
Press ENTER to confirm.
•
Select “Primary” or “Alone”.
•
Press ENTER to confirm.
•
Press MODE/ESC in order to return to the main menu.
Auto Pro
Part 1
Auto Pro
Part 2
Auto Pro
Part 3
Auto Pro
Part 1
Auto Pro
Part 2
Auto Pro
Part 3
Auto Pro
Part 1
Auto Pro
Part 2
Auto Pro
Part 3
Summary of Contents for Proteus Lucius
Page 1: ...user manual...
Page 46: ......
