31
E- F LY W I R E L E SS D M X S E T U P
BEFORE SETTING THE WIRELESS CHANNEL ON ANY E-FLY FIXTURE, MAKE SURE
THE SOURCE E-FLY WIRELESS DMX TRANCEIVER DEVICE OFF.
1. Ensure the source
E-FLY
wireless DMX Tranceiver device is powered
OFF
.
2. Power
ON
fixture and from the LCD control panel select
DMX & E-FLY
or
E-FLY & OUT
in
the Select
Signal
sub menu of the
PERSONALITY
main system menu.
3. From the LCD control panel set the
E-FLY
wireless channel to the same wireless channel of the
source
E-FLY
DMX Transceiver device in the
Set E-FLY Chn
sub menu of the
PERSONALITY
main system menu.
NOTE
: Erratic fixture movement may occur if other
E-FLY
wireless DMX products are in use
in the same area and are using the same
E-FLY
wireless channel. The fixture may immediately
start to respond to the DMX wireless signal from another
E-FLY
wireless DMX Transceiver
immediately when
E-FLY
is enabled. Make sure to know what
E-FLY
wireless channels are being
used in the area where the fixture is being installed.
ELATION E-FLY WIRELESS TRANSCEIVER has 0-14 wireless channels.
4. Set fixture DMX address in the
Set Dmx Address
sub menu of the
FUNCTION
main system
menu.
5. The
E-FLY
signal Indicator on the fixture LCD control display will illuminate
GREEN
if a
successful wireless DMX connection has been made or illuminate
RED
for NO connection. If
no connection is made, repeat steps 1-4 above.
6. Repeat this process for all
E-FLY
compatible fixtures in the
E-FLY
wireless network, making
sure all fixtures are assigned the same
E-FLY
wireless channel.
7. After all fixtures in the
E-FLY
wireless network have been set to the same
E-FLY
wireless
channel and powered
ON
, now power
ON
the source
E-FLY
DMX Transceiver device.
8. Test all fixtures connected to the
E-FLY
wireless network to confirm proper functionality.
E-FLY WIRELESS INSTALLATION LOCATION GUIDELINES
There are many factors that affect and/or interrupt a wireless signal such as walls, glass,
metal, objects, and people. Therefore, it is highly recommended to:
• Install devices a minimum of 9.8 ft. (3m) above audiences and/or ground level
• Adjust the wireless antenna in a vertical upright position
• Position devices in direct line of sight of the controlling E-FLY device
Careful planning and testing of the selected installation location is critical to ensure optimum
and reliable wireless operation.
Summary of Contents for PRE937
