w w w . e l a t i o n l i g h t i n g . c o m
44
PLATINUM SPOT 35 PRO™ User Manual Version 1
ELATION© PLATINUM 35 PRO™
E R R O R C O D E S
Specifications and features are subject to change without any prior written notice.
ERROR CODE
DESCRIPTION
PAN Er
The PAN movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit malfunctions
(sensor failed or magnet is missing) or there is a motor failure (defective motor or a
defective motor IC drive on the main PCB). This error may also be displayed if the
head/yoke was blocked during a reset function.
TILT Er
The TILT movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit malfunctions
(sensor failed or magnet is missing) or there is a motor failure (defective motor or defective
motor IC drive on main PCB). This error may also be displayed if the head was blocked
during a reset function.
Cyan
Color Wheel Er
The Color Flag is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure
(defective motor or defective motor IC drive on main PCB).
Magenta
Color Wheel Er
The Color Flag is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure
(defective motor or defective motor IC drive on main PCB).
Yellow
Color Wheel Er
The Color Flag is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure
(defective motor or defective motor IC drive on main PCB).
CTO
Color Wheel Er
The Color Flag is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure
(defective motor or defective motor IC drive on main PCB).
Color Wheel Er
The Color Wheel is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure
(defective motor or defective motor IC drive on main PCB).
