Elation KL FRESNEL 8 PO, User Manual

Page: 19 / 22

19
MANUAL DIMMING AND ZOOM CONTROL
Follow steps below to enable manual DIMMING and ZOOM control knobs.
1. Disconnect any DMX cables from the device.
2. From the main system menu, select the “Test” option, then select the “Man Ctrl” sub-menu. See
the System Menu section of this manual for details.
NOTE: To access the LCD Menu Control Display when the screen is locked or powered down,
press and hold the MODE button for 3 seconds.
3. Select the Strobe option, and set to a value of 255 (LED ON). Return to the main system menu.
4. Push the DIMMING knob to unlock, rotate to adjust as desired, and push the knob again to lock.
5. Push the ZOOM knob to unlock, rotate to adjust as desired, and push the knob again to lock.
NOTE: FEATURE IS DISABLED WHEN DMX INPUT CABLE IS CONNECTED TO FIXTURE!
In order to use these manual dimming and zoom knobs, any DMX cables must be disconnect-
ed beforehand. When the DMX cables have been disconnected, the display screen will display
“Dim:XXX” and “Zoom XXX” to indicate that manual dimming and zoom control have been enabled,
as shown below.