*NOTE: The EVELED VSC can control/drive up to 1280x1024 resolution. So if using EVLED256 panels, one (1) EVLED VSC controller
can drive a wall size of up to 80 panels wide by 64 panels high. Up to ten (10), EVLED256, panels can be connected into a single 20A
circuit.
6. Adjust play area start position: By default, the X/Y start position coordinates are 0 for X and 0 for Y. These coordinates place the play area in
the upper left corner of your PC monitor.
The X start point refers to the width of your monitor. The Y start point refers to the height of your monitor. Simply input the number of pixels that
you want the play area of your screen moved to then click “Set New”. For example, if I wanted to move my play area down 50 pixels, I’d input a
value of 50 into the “Start Y” box and click “Set New”. The play area will immediately move down and display whatever is currently in that area onto
your video wall.
