ELAR Tri Brick
™
©Elation Professional, Los Angeles Ca.
10
www.ElationLighting.com
3. Yoke Assembly –
This yoke is designed to perform two functions; 1) It can be used
as a floor stand bracket, or 2) Used to secure a mounting clamp for truss mounting.
4. Fixture Housing –
A heavy-duty aluminum case that is designed to be IP 66 rated.
5. DMX In Lead –
This lead is the main DMX input lead. When the unit is the first in a
chain or the only fixture to be used with a DMX controller, be sure to use the DMX
starter cable that converts a standard 3-pin XLR DMX connector to the IP rated twist
lock connector that is used on the fixture. When jumping from fixture to fixture be
sure to only use Elation IP rated DMX cables to maintain the IP rating.
6. DMX Out Lead –
This lead is used to send an incoming DMX signal to the next
fixture in the DMX chain. To maintain the integrity of the IP rating, only use proper
Elation IP rated DMX cables.
7. Main Power Input Lead –
This lead is the main power input lead. When the unit is
the first in a chain or the only fixture to be used, be sure to use the power starter
cable that converts a standard Edison 3-prong to the IP rated twist lock connector.
When jumping from fixture to fixture be sure to only use Elation IP rated power
connectors to maintain the IP rating.
8. Power Output Lead –
This lead is used to jump power to another ELAR TRI
BRICK™. Please do not daisy chain power for more than 16 fixtures. To maintain the
integrity of the IP rating, only use proper Elation IP rated power cables.
9. MENU Button –
This button is used to access the fixtures menu functions.
10. Up Button –
The up button is used to toggle forward through the menu functions and
settings.
11. Down Button –
The down button is used to toggle backwards through the menu
