Elation Elar Quad Par User Manual Download Page 5

 
 

w w w . e l a t i o n l i g h t i n g . c o m    

 

                                                                                                                                                                                        5

                                                               

ELAR   QUAD   PAR

™   

User   Manual   2.0

 

BOX CONTENTS 

  (1) IP68 Rated Power Cable

 

  (1) 3-Pin XLR Cable 

  (1) Safety Cable

 

  Manual & Warranty Card

 

M A N U A L   U P D A T E S  

Please check 

www.elationlighting.com

 

for the latest revision/update of this manual. 

CUSTOMER SUPPORT 

Elation  Professional

®

  provides  a  customer  support  line,  to  provide  set  up  help  and  to 

answer  any  question  should  you  encounter  problems  during  your  set  up  or  initial 

operation.  You  may  also  visit  us  on  the  web  at 

www.elationlighting.com

  for  any 

comments  or  suggestions.  For  service  related  issue  please  contact  Elation 

Professional®. Service Hours are Monday through Friday 8:00 a.m. to 5:00 p.m. PST. 

Voice: 323-582-3322

   

 

 

 

Fax: 323-832-9142

 

E-mail: 

[email protected]

 

Forum: 

www.ElationLighting.com/forum

 

 

WARRANTY REGISTRATION

 

The 

ELAR  QUAD  PAR

 carries a two-year (730 days) limited warranty. Please fill out 

the enclosed warranty card to validate your purchase. All returned service items whether 

under  warranty  or  not,  must  be  freight  pre-paid  and  accompany  a  return  authorization 

(R.A.)  number.  The  R.A.  number  must  be  clearly  written  on  the  outside  of  the  return 

package.  A  brief  description  of  the  problem  as  well  as  the  R.A.  number  must  also  be 

written  down  on  a  piece  of  paper  and  included  in  the  shipping  container.  If  the  unit  is 

under  warranty,  you  must  provide  a  copy  of  your  proof  of  purchase  invoice.  Items 

returned  without  a  R.A.  number  clearly  marked  on  the  outside  of  the  package  will  be 

refused  and  returned  at  customer’s  expense.  You  may  obtain  a  R.A.  number  by 

contacting customer support at 323-582-3322. 

I M P O R T A N T   N O T I C E !  

There  are  no  user  serviceable  parts  inside  this  unit.  Do  not  attempt  any  repairs 
yourself; doing so will void your manufactures warranty. Damages resulting from 
modifications  to  this  fixture  and/or  the  disregard  of  safety  and  general  user 
instructions  found  in  this  user  manual  void  the  manufactures  warranty  and  are 
not subject to any warranty claims and/or repairs. 

 

 

 

 

 

Summary of Contents for Elar Quad Par



































Reviews: