Operation Guide
Receive (DMX) Mode
MODE MENU
1
4
3
2
2. Tap the up
or down
buttons to set your
desired DMX channel address setting. Pressing
and holding the up or down buttons will change
the values in the display quickly. This is useful
when trying to achieve higher channel values.
MODE MENU
1
4
3
2
3. Press the MENU button to access the total
DMX channel option setting. The display will
show C
, C
or C
.
h:01
h:02
h:04
7
MODE MENU
1
4
3
2
1. Press the MODE button to access receive
(DMX) mode. An “A” in the display indicates
receive mode. There will also be a small
indicator illuminated on the top right side of
the display next to the “Receive” text. In
addition, if you’ve connected your DMX
console to the pack, there will be a flashing
indicator in the top left side of the display next
to the “DMX Signal” text indicating that DMX
signal is present.
A:001
DMX Signal
Receive
Chase
A:025
DMX Signal
Receive
Chase
CH:04
DMX Signal
Receive
Chase
Controls & Functions
Front Panel Layout Cont.
4
This product must not be continuously used
for a long time under 20A total output load
Power input:
1
2
3
4
1 : Ground
2 : Data -
3 : Data +
DMX OUT
DMX IN
Power
Risk of Electric Shock
DO NOT OPEN
CAUTION
FUSES:F10A 250V 5x20mm
Made in PRC 23-001-1568
AC 120V~ 50-60Hz, 20A max.
Fuses (internal):
F0.315A 250V 5x20mm
1
2
3
1
2
3
N'ouvrez pas..risque de choc electrique
Warning:This apparatus must be earthed
8
9
11
10
12
6. Up Arrow
Button:
Pressing this button will increase any value listed in
the display by one. Pressing and holding this button
down will increase the displayed value quickly.
7. Down Arrow
Button:
Pressing this button will decrease any value
listed in the display by one. Pressing and holding
this button down will decrease the displayed
value quickly.
Rear Panel Layout
8. Power Switch:
This switch turns the device ON & OFF.
9. Power Input:
The line cord supplies power to the device. Plug into a 120V.-60Hz. Outlet.
10. Fuse Holders (1-4):
These fuse holders house one 10 amp, 120V, 5x20mm. fuse each. Each
channel fuse protects the corresponding internal components from getting
damaged if there were ever a short or voltage spike.
11. 3-pin XLR DMX Input Connector:
This input receives DMX signal from a DMX controller or previous device.
12. 3-pin XLR DMX Output Connector:
This output feeds DMX signal through to the next DMX device in line.
