w w w . e l a t i o n l i g h t i n g . c o m
10
DMX-BRANCH/4™ User Manual
D E V I C E O P E R A T I O N
Be sure the power is disconnected before making any type of connections.
Connect the output signal from your DMX controller to the input jack of the
DMX-Branch/4.
Use the four output channels to send DMX signal to your DMX fixtures.
Link up to (4) DMX-Branch/4 devices together using the DMX Output (thru).
If you are not using the DMX Output (thru) port to link multiple DMX-Branch/4’s
together, push the terminate button in. (Terminate Mode)
LED Indicators:
Each of the four DMX output channels has a set of
RED
and
GREEN
LED indicators.
NO Incoming DMX signal =
RED
LEDs will function as a power indicator
Incoming DMX signal detected = the
RED
and
GREEN
LED’s will serve two functions:
1. Indicates Pin Polarity:
Solid RED
= Pin 3 is hot (positive)
Solid GREEN
= Pin 2 is hot (positive).
2. Indicates Shorted or Bad Cable Connected to Specific Channel:
LEDs
= OFF
