manualshive.com logo in svg

Elation Design Spot 1400E, Owner'S Manual, Page: 33 / 68

Share
Download
Elation Design Spot 1400E Owner'S Manual Download Page 33

 
 

Design Spot 1400E™ 

©Elation Professional®                                      33                                  Design Spot 1400E™ 

 

 

 

 

Preset User mode 

   

This function allows the user to make the actual changes in the user-defined modes 

 

 

that are accessed through the previous function. 

10.8  EDIT PROGRAM: 

 

10.8.1 Select program –

 This function allows the user to select one of ten of the user 

defined built-in programs. This program is then accessed in “Function Mode” under 

“Program Run.” 

 

10.8.2 Edit program –

 This function allows the user to edit the built-in programs. 

 

10.8.3 Edit Scenes –

 This function allows the user to edit or define the actual scenes that 

are stored in the user defined built-in programs that are accessed in the previous 

step. 

 

10.8.4 Auto Scenes rec -

 The Design Spot 1400E features an integrated DMX recorder by 

pre-programmed scenes can be transmitted to the fixture via any standard DMX 

controller. This function allows those scenes to be stored in to the fixture’s built-in 

memory and then subsequently used to create user-defined programs. See working 

with built-in programs Section 14 / Page 41. 

 

 

Summary of Contents for Design Spot 1400E





































































Reviews:

No comments