Elation Design Spot 1200C, User Manual, Page: 34 / 64

Design Beam 1200C™
©Elation Professional® 34 Design Beam 1200C™
6. Press MODE/ESC to return to the main menu.
Controller Settings :
1. Set the DMX value of channel 1 to a value of 7.
2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is set to
"7" you can adjust the starting address between 1 and 255. When set to "8"
you can adjust the starting address between 256 and 511.
3. Use channel 3 to set your desired DMX starting address. For example: If
you want to set the starting address to 57, set channel 1 to a value of “7,” set
channel 2 to a value of “7” and use channel 3 to set your address to 57 by
selecting a channel value of 57. Example 2: If you want to set the starting
address to 420, set channel 1 to a value of “7,” channel 2 to "8" and channel
3 to "164" (256+164=420).
4.
Wait for approximately 20 seconds for the unit to complete the address
reset function.