Elation Design Par 575H, Manual

Page: 34 / 56

Design Par 575H™
©Elation Professional® 34 Design Par 575H™
RDMX - Allows DMX address to be changed via and external DMX controller.
DLOF - Switch lamp off via DMX controller.
DLAY - Lamp-on delay time.
SPOT - This provides a spot beam for better lamp optimization.
DFSE (Default) - Resets the unit to all default settings.
FEED - This function turn the DMX correction feature “ON” (default) or “OFF.”
FANS - Changes the functionality of the built-in fans.
VER (Version) - Displays the software version.
ADJU – Calibration functions
LAAU
– This function controls the automatic lamp start feature. By default the unit will
automatically ignite the lamp when unit is turned on. Use this function to turn this
feature on and off.
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “LAAU” is displayed, press ENTER.
4. The display will show “ON/OFF.”
5. P r e s s t h e U P b u t t o n t o d i s p l a y “ O N ” t o a c t i v a t e t h i s f u n c t i o n , o r “ O F F ” t o
deactivate this function.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
RDMX
– This function allows the DMX address to remotely be adjusted from a DMX
console. This setting requires special settings for both the controller and the fixture.
RDMX is on by default. Follow the procedure listed below to access the RDMX
functions:
Fixture Settings :
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “RDMX” is displayed, press ENTER.