4
3
2
1
FUSES: F6A 250V 5x20mm
DMX OUT
DMX IN
POWER
1 - Ground
2 - Data-
3 - Data+
MIDI IN
MIDI THRU
REMOTE
P
U
S
H
1
2
3
1
2
3
AC 120V~ 50/60Hz, 15A max.
CAUTION
N'ouvrez pas..risque de choc electrique
Warning :This apparatus must be earthed
Risk of Electric Shock Disconnect Input Power
Before Opening
1
2
3
1/4"stereo jack
Full on
Stand By
GND
1. Overview
1.2 Rear Panel
4
1. Power switch:
This switch controls units main power.
2. Channel Fuses:
Each of the four channels is protected by a 6A fuse.
These fuses prevent you from overloading and damaging.
3. Remote connector:
This connector is connected with a foot control or
detector(sold separately).
4. MIDI IN connector:
This connector is used to receive MIDI signal from a MIDI
controller or MIDI sequencer.
5. MIDI THRU connector: This connector is used to transfer MIDI signal
to another MIDI device.
6. DMX IN connector:
This connector is used to receive DMX signal
7. DMX OUT connector:
This connector is used to transfer DMX signal to a DMX
power pack or dimmer.
8. Power Input Cord:
Plug this cord into a matching power supply.
1
2
8
3
4
5
6
7
