23
www.elationlighting.com
E - F L Y W I R E L E S S D M X S E T U P
BEFORE SETTING THE WIRELESS CHANNEL ON ANY E-FLY FIXTURE, MAKE
SURE THE SOURCE E-FLY WIRELESS DMX TRANSCEIVER DEVICE IS OFF.
TO CONTROL FIXTURE WITH E-FLY WIRELESS DMX SIGNAL
1. Ensure the source
E-FLY
wireless DMX Transceiver device is powered
OFF
.
2. Power
ON
fixture and from the LCD control panel select
DMX & E-FLY
or
E-FLY & OUT
in
the
Select Signal
sub menu of the
PERSONALITY
main system menu.
3. From the LCD control panel set the
E-FLY
wireless channel
to the same wireless
channel of the source
E-FLY
DMX Transceiver device in the
Set E-FLY Chn
sub menu of
the
PERSONALITY
main system menu.
NOTE:
Erratic fixture movement may occur if other
E-FLY
wireless DMX products are in use
in the same area and are using the same
E-FLY
wireless channel. The fixture may
immediately start to respond to the DMX wireless signal from another
E-FLY
wireless DMX
Transceiver immediately when
E-FLY
is enabled. Make sure to know what
E-FLY
wireless
channels are being used in the area where the fixture is being installed.
ELATION E-FLY WIRELESS TRANSCEIVER only has 0-14 wireless channels, NO CH 15.
4. Set fixture DMX address in the
Set Dmx Address
sub menu of the
FUNCTION
main
system menu.
5. The
E-FLY
signal Indicator on the fixture LCD control display will illuminate
GREEN
if
a successful wireless DMX connection has been made or illuminate
RED
for NO
connection. If no connection is made, repeat steps 1-4 above.
6. Repeat this process for all
E-FLY
compatible fixtures in the E-FLY wireless network,
making sure all fixtures are assigned the same
E-FLY
wireless channel.
7. After all fixtures in the
E-FLY
wireless network have been set to the same
E-FLY
wireless channel and powered ON, now power ON the source
E-FLY
DMX
Transceiver device.
8. Test all fixtures connected to the
E-FLY
wireless network to confirm proper
functionality.
