1. Overview
1. Preset A LEDs
4. Preset B LEDs
5. SCENE LEDs
2. Channel Sliders 1-12
6. Channel Sliders 13-24
3. Flash Buttons 1-12
7. Flash Buttons 13-24
8. Dark Button
9. Down/Beat Rev
10. Mode Select/Rec Speed
11. Up/Chase Rev
12. Page Button
13. Delete/ Rev One
14. Segment Display
15. Insert / % or 0-255
from 1 to 12.
to full intensity.
These 12 buttons are used to bring an individual channel,
to full intensity. They also are used for programming.
This button is used to momentarily black out overall output.
program with regular beat.
in Mix mode.
under Speed Slider control.
Tap to select pages of scenes from Page 1-4.
of any program.
Shows the current activity or programming state.
Insert is to add one step or steps into a scene.
% or 0-255 is used to change display value cycle between
% and 0-255.
Delete any step of a scene or reverse the chasing direction
Chase Rev is to reverse the chasing direction of a scene
Up is used to modify a scene in Edit mode.
Rec Speed: Set the speed of any of the programs chasing
CHNS /SCENES, Double Preset and Single Preset.
Each tap will activate the operating mode in the order:
BEAT REV is used to reverse the chasing direction of a
DOWN functions to modify a scene in Edit mode;
These 12 buttons are used to bring an individual channel,
intensities of channels 1-12.
These 12 sliders are used to control and /or program the
intensities of channels 13-24.
These 12 sliders are used to control and /or program the
Show the current intensity of the relevant channel numbered
from 13-24.
Light when relevant scenes are active.
Show the current intensity of the relevant channel numbered
1.1 Front View
4
