ELARABY TORNADO THB-600W, Manual

Page: 8 / 12

5
CLEANING AND MAINTENANCE
Quick cleaning
Instruction for masher
Prepare 300g cooked potatoes, cut each potato into 4 pieces. Max operation duration per time
cannot exceed 30s, and 1minute rest time must be maintained at two consecutive cycles.
1. Insert the potato bar into the motor unit, when inserted in place, a click will be heard.
2. Simply plug the hand-held blender to power outlet.
3. Lower the blade into food, choose the speed setting by rotating the speed dial, then press and
hold the On/Off button. The unit will run at the highest speed when pressing and holding turbo
button.
NOTE :
1- On/Off button is also provided with variable speed function, when you press and hold it,
speed will vary according to your pressing pressure.
2- Please don’t use our cup to mash potatoes, you should use a big enough bowl to mash
potatoes.
3- Never use the masher to process the uncooked potatoes.
4. Release the On/Off button to stop operating when food consistency is obtained.
Unplug the appliance and remove the detachable blending rod.
Note: Do not immerse the detachable blending rod of the blender in water because overtime the
lubrication on the bearings may wash away.
2. Wash the detachable blending rod under running water, without the use of abrasive cleaner
or detergents. After finishing cleaning the detachable blending rod, place it upright so that any
water which may have got in, can drain out. The blending rod is dishwashing safe component.
3. Wash the cup, bowl, beater and blade in warm soapy water. The bowl and the beater are not
recommending to place in dishwashing machine as the plastic components deteriorate through
prolonged use of dishwasher cleaning.
4. Wipe the motor unit with a damp cloth. Never immerse it in water for cleaning as an electric
shock may occur.
5. Dry thoroughly.
Caution: Blades are very sharp, handle with care.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations:
hand in the non-working electrical equipments to an
appropriate waste disposal center.
Between processing tasks, hold the hand-held blender in the cup half filled with water and turn
on for a few seconds