ELARABY TORNADO EHV-M30FSU-S, Owner'S Manual

Page: 25 / 48

MALFUNCTIONS AND TROUBLESHOOTING
The stove may sometimes not operate or its operation may not be correct.
First, make sure that gas and electric supply mains are not interrupted, and
check whether the gas valves on the stove are open or not.
The burner does not ignite, or the flame is not stable.
The gas outlet holes of the burner are clogged,
Some of the moving parts of the burner are not properly installed,
There may be an air stream near the stove.
The flame goes out soon after it lights
The button might be not pressed completely.
The button might be not pressed long enough to enable safety equipment.
The gas outlet holes opposite the burner safety equipment might be clogged.
The burner does not stay alight in its minimum position.
The gas outlet holes are clogged,
There might be an air stream near the stove.
Its minimum adjustment might be incorrect.
The pots are seating unevenly.
The pot carrier may not be properly seated.
Is the pot floor smooth?
The grills might be misplaced.
Grill gaskets might be missing.
If all lighters are operating by pushing a single control button.
It is normal. Our lighter system is centralized and all lighters operate
simultaneously.
The lighter does not operate when the control buttons are pressed.
Are electrical connections of the stove correct? The fuse may have blown. Is
the lighter clean?
Are the burners (top, plate, etc.) properly placed?
If the buttons get hot during cooking,
Use small cookware on the stoves near the control buttons. The large
cookware should be placed away from the buttons. Place the pan in the
middle of the stove; pans and utensils should not go over the buttons.
IF THERE IS STILL A PROBLEM WITH YOUR DEVICE, PLEASE
CALL ELARABY /TORNADO AUTHORIZED SERVICE...