FRANKED AND METERED RATES SETTING
Before using your new PS 3000, you must set whether it will default to assessing Franked and Metered rates or not. To set
the default, please follow these steps
1. Unplug the scale small black power plug from the rear of the scale
2. Press the ‘SEA MAIL’ and ‘PERSON TO PERSON’ keys
simultaneously
and hold while you plug in the power
socket again
.
The scale display will show
1: Lodgment SET:
2: FM/ no FM
3. Press the number 2 on the keypad and then press ENTER. The scale will prompt
1: FM Default:
2: No FM
4. Press 1 if you want to use Frank and Metered rates or press 2 if you want to use the normal rates. Complete the
entry by pressing “ENTER” and a confirmation message is displayed.
5. Unplug the scale and use it or go to the next step
**Note:
Due to rounding off of values, some franked and metered rates in th e PS3000 scale have discrepancies with the
actual computed rate.
LODGMENT ZONE SETTING
IMPORTANT: you must set this function in your scale before assessing postage for domestic mail and parcels.
Before using your new PS 3000, it is very important that it be told where it lives. This is necessary so that the internal
computer can assess postal charges from your location to any destination within Australia.
To set the Lodgment zone,
1. Determine the Lodgment Zone code from the table below
2. Unplug the scale small black power plug from the rear of the scale
3. Press the ‘SEA MAIL’ and ‘PERSON TO PERSON’ keys
simultaneously
and hold while you plug in the power
socket again
. .
The scale will prompt
1: Lodgment SET:
2: FM/ no FM
4. Press 1 on the keypad and then press ENTER. The scale will display a “Lodgment Zone Entry” message for a short
while and then it will prompt
Enter Zone =
Summary of Contents for PS 3000
Page 16: ......
