background image

 
 
 

E L A N   H O M E   S Y S T E M S

 

VL10

 

 

© ELAN Home Systems   2011 • All rights reserved.

Page 3

 
 
 
 

  

 

Introduction

 

The VL10 Tabletop/Under-Cabinet Color Touch Panel is an affordable 
interface for controlling audio, video, and automation equipment in a 
multi-room or Home Theater environment. Whether it’s on a desk in a 
home office, a nightstand by the bed, or in the kitchen on the counter or 
mounted under a cabinet, the VL10 is the right choice.  

Touch

 

Screen

 

Technology

 

The VL10 utilizes a polyester plastic film suspended over a glass panel, 
which is then adhered to the front of a color LCD (Liquid Crystal Display) 
screen. Depressing the polyester film with a finger allows the film to 
touch the glass panel underneath, generating a location signal that is 
read by the electronics. The 10-inch diagonal color LCD display is an 
active matrix TFT Liquid Crystal Display.  Please use fingers only when 
operating this unit.

 

Do not use pens, pencils, or styluses as these 

may damage the polyester film.

 

Features

 

 

Ideal for Desk or Countertop Use 

 

Mounts Easily Under Cabinetry 

 

Folds Down Flat and Out of the Way 

 

135  Back/Front 45°- 330°Left/Right Display Swivel  

 

Full Touch Screen Capabilities 

 

Full Motion Color Video Capabilities, Widescreen, Landscape Aspect Ratio 

 

10 Inch Color Active Matrix TFT Liquid Crystal Display 

 

Easy, Powerful g!

®

Tools Programming 

Summary of Contents for vl10

















Reviews: