© ELAN Home Systems 2005 • All rights reserved. Page 19
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
VIA!Valet6.4
Connections
Stand-Alone/Home Theater
The VIA!Valet6.4 is ideal for use as a stand-alone system controller or
Home Theater controller. For control of a Home Theater system, the
VIA!Valet6.4 and PVIA1 Valet Wall Plate are combined with a method
for IR distribution such as ELAN’s IRD4 Amplified Connection Block.
Signals originate at the VIA!Valet6.4, pass through the PVIA1 Valet
Wall Plate, then travel to the connection block where they are routed
to each component.
Note:
This application does not allow for independent control of
identical sources. An ELAN multi-room preamp or SR-1 System
Controller should be used in that scenario.
Amplified IR
Connection Block
+16V
GND
+16V
GND
V485+
V485-
IR
ST/SNS
Z485+
Z485-
SIR
Sources
PVIA1 Valet
Rear
BLUE
WHITE/BLUE
ORANGE
WHITE/ORANGE
GREEN
WHITE/GREEN
BROWN
WHITE/BROWN
1
2
3
4
5
6
7
8
PIN # COLOR CODE
FRONT
CABLE
Standard ELAN RJ-45 Pin-Out
TAB
To Front
of PVIA1
Valet
PWR2
ELAN
IR Emitters