© ELAN Home Systems 2005 • All rights reserved. Page 19
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
VIA!4.0
Installation - Rough-In ( cont’d)
Retro-Fit
The VIA!4.0 will easily install directly into the wall (with no rough-in
bracket) when being utilized in a retro-fit application. Use the tem-
plate included in the box to carfeully mark the location to be cut. Be
very careful about AC lines, HVAC, communications wires, etc. when
cutting into a wall!
There are two ways to mount the VIA!4.0 when not using a
VIABKT40:
• Use the clamping winglets on the side of the unit.
• Use the pre-drilled holes to attach the unit to a stud or other
secure point.
Tighten
(Clockwise)
Side View
Winglet
Up
Winglet
Down
Summary of Contents for VIA! 4.0
Page 1: ...4 0 Color LCD Touch Panel INSTALLATION MANUAL...
Page 2: ......
