Elan g!, Integration Note, Page: 3 / 4

3 of 4
g! C
ONFIGURATION
D
ETAILS
The following table provides settings used in the
g!
Configurator. Please refer to the
Configurator Reference Guide
for more details.
o
“<Select>” Select the appropriate item from the list (or drop-down) in the Configurator.
o
“<User Defined>”, etc. Type in the desired name for the item.
o
“<Auto Detect>”, etc. The system will auto detect this variable.
Devices Variable Name Setting Comments
Communication Devices Name
<User Defined> (Default:
Security
)
Type Serial Port
System Controller Name
N/A
Communication Type Standard Connection
Location
<User Defined> (Not Required)
Com Port
<Select>
Security Panels Name
<User Defined> (Default:
GE Concord
)
Device Type GE Concord
Location
<User Defined> (Not Required)
Comm Device
<Select> (Default:
Secuirty
)
Name Show Auto Keys
Disarm Disarm Yes NO Code + Enter
See Note 1.
Mode 1 Away Yes NO Code + Enter
Mode 2 Stay Yes NO Code + Enter
Mode 3 Stay Inst. Yes NO Code + Enter
Mode 4 Night Yes NO Code + Enter
Mode 5 Night Inst. Yes NO Code + Enter
Mode 6 Vacation Yes NO Code + Enter
Partions Name
<Auto Detect>
Show Partition Yes
Areas in Partition
<User Defined> (Not Required)
Zones Name
<Auto Detect>
Enable Bypass
<Select> (Default:
Yes
) (See Note 2)
Exists in Partition
<Select> (See Note 3)
Notes:
1. To avoid having to press Enter, setup all the PINs in the system with the same number of digits (4, 5 or 6), then select
4 (5, or 6) Keys
.
2. The Enable Bypass is set to Yes by default: change this to No for any zones you do not wish bypassed from the Viewer interface.
3. For each zone, select the partitions in which that zone is a part.