ELAN Home Systems
●
1690 Corporate Circle
●
Petaluma, CA 94954 USA
tech support: 800.622.3526 • main: 760.710.0990 • sales: 877.289.3526 • email: [email protected]
©2013 ELAN Home Systems. All rights reserved. ELAN and
g!
are trademarks of ELAN Home Systems. All other trademarks are the property of their respective owners.
Integration Note
Manufacturer:
GE
Model Number(s):
Concord 4 (600-1040)
Core Module Version:
4.0 (Build 1463 and later)
Comments:
Factory Code 197.1414, System Number 006040, System Level 0501
Document Revision Date:
1/30/2013
O
VERVIEW AND
S
UPPORTED
F
EATURES
The
GE Concord
panels integrate with the
g!
system using an RS-232 serial connection. The Concord
requires the
SuperBus 2000 Automation Module (60-783-02)
in order to integrate with
g!
.
Integration of the security system provides monitoring and control from any touch screen, telephone or
computer both locally and remotely. Additionally, events occurring in the security system can trigger
system commands in other sub-systems in the home. For example, a burglar alarm can turn all the lights
on and send out email alerts. The security system can also receive commands as a result of events
within other sub-systems. For example, changing the house mode from Home to Vacation can trigger a
security command to arm the system.
T
HESE PANELS SUPPORT THE FOLLOWING FEATURES
:
Arm – Disarm:
Arm and disarm from the Viewer interface is supported. Status information is available for
all partitions.
Auto Arm:
Arming as a System Command from the Event Mapper is supported. By default, automatic
arming is enabled in the Configurator.
Zone Status:
Zone status information is available for all zones (in any partition), and is properly shown in
the Viewer.
History View:
The history view is properly supported on any Viewer.
Auto Zone and Partition Detection
: The
g!
system will automatically detect the zone name and number
as well as partition name and number.
Zone Bypass:
Faulted zones may be bypassed to allow arming.
Note:
Due to the Concord panels programming, bypassing a faulted zone can only be done after the
“Arm” command has been sent.
Note:
The GE Concord panel may not be compatible for control via all
g!
system controllers. Please
contact ELAN support for assistance or use an alternate connection method.
T
HESE PANELS DO NOT SUPPORT THE FOLLOWING FEATURES
:
Any feature not specifically noted as supported should be assumed to be unsupported.
