05
contact
PREMIUM SERIES
USER MANUAL
Matrix Main Com Board
The Matrix main communication board is located on the rear panel and has the following connections:-
Connections:
A.
TCP/IP – For control of Matrix (RJ45 Connector)
B.
Ethernet – Matrix includes 1x16 10/100 Ethernet switch (RJ45 Connector)
C.
Global IR Input 3.5mm stereo jack
D. Global IR Output 3.5mm mono jack
E. RS-232 2-way (Phoenix Connector)
TCP/IP
The ELAN Matrix can be controlled via TCP/IP.
For full list of protocols please see ‘RS-232 & Telenet Commands’ located at the
rear of this manual.
A ‘Straight-through’ RJ45 patch lead should be used
RS-232 2-Way
The ELAN matrix can be controlled via supplied 3-pin Phoenix to 9-pin serial cable
For full list of protocols please see ‘RS-232 & Telenet Commands’ located at the
rear of this manual.
Details of RS-232 pin assignment and communication are below:
MT0808-FAV
REMOTE CONTROL
CONSOLE
PIN
Assignment
PIN
Assignment
1
NC
1
NC
2
Tx
2
Rx
3
Rx
3
Tx
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
Baud Rate:
57600 bps
Data Bit:
8-bit
Parity:
None
Stop Bit:
1-bit
Flow Control:
None
TCP/IP
A
B
C
D
E