E L A N H O M E S Y S T E M S
Page 7
© ELAN Home Systems 2003 • All rights reserved. 11/03
DTNR
USER’S
GUIDE AND
INSTALLATION MANUAL
FRONT PANEL & REMOTE CONTROL OPERATION
Function Names
A. REMOTE SENSOR
Receives IR information from infrared emitters and the remote control.
B. STANDBY indicator
This LED is lit when the unit is in the standby mode. When the unit is
turned on, the LED goes off.
C. POWER switch
Press this to switch the unit between ON and STANDBY. The equipment
draws nominal non-operating power from the AC outlet when it is in
STANDBY mode.
D. FM button, AM button
Use these buttons to select either FM or AM.
E. FM MODE button
Use this button to select either FM stereo or FM monaural reception.
F. PRESET
button
Use this button to select the Preset Tuning Mode. In Preset Mode, the
numeric buttons on the remote control or front panel can be used to
directly access preset stations that have been stored in the DTNR’s
memory.
G. DIRECT button
Use this button to select the Manual Tuning Mode. In Manual Tuning
Mode, the numeric buttons on the remote control or front panel can be
used to directly input the frequency numbers of radio stations.
H. MEMORY button
Use this button to store preset stations into memory.
I. TUNING/PRESET
buttons
Use these buttons to tune in a station.
J. Numeric buttons
These buttons are used either to input frequency numbers or to select
preset stations.
K. LCD Display
DTNR-manual-FINAL-dupe 11/10/03 9:45 AM Page 7
