5
DMX Mode
Operating through a DMX controller give the user the freedom to create their own Programs tailored to their
own individual needs. This function also allows you to use your units as spot lights.
Touch Buttons
There here are four touch buttons under the LED display: Menu,
Up, Down, Enter. Normally, the LED will display the current DMX
address code of the fixture. At this time, presses up and down to
choose the functions you want.
LED Operation Menu
LED screen with four touch buttons:
MENU, UP, DOWN and ENTER
.
Press MENU to return to the upper menu; Press UP or DOWN to scroll into the menu options or to adjust
the values. Press ENTER to confirm.
After power on and initialization, it will show the status before last power off. Then, the unit is ready for set-
ting and working. Please see the following table for setting information.
1. This function will allow you to control each individual unit’s traits with a standard DMX 512 controller.
2. The LED suit uses 3/4/6DMX channels to operate. Please see “DMX Values and Functions” for the
DMX traits.
3. To run your unit in DMX mode, plug in the unit via the XLR connections to any standard DMX con-
troller. Set your desired DMX address following the setup specifications that come with your DMX
controller.
LED Display
Main Menu
Mode
Value
Functions
/
001-511
To set the DMX
address code
A 001
/
Mode A 3channels
(R, G, B)
P 001
/
Mode P 4channels
(Dimmer, Strobe, R,
G, B)
F 001
/
Mode F 6channels
(R, G,.B, Strobe,
Macro, Dimmer)
001-100
Red
001-100
Green
/
001-100
Blue
/
001-100
Strobe speed (slow
--> fast)
