2
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits s marked change in performance.
DMX Linking
: To ensure proper DMX data transmission, when using several DMX units try to use the
shortest cable path possible. The order in which units are connected in a DMX line does not influence
the DMX addressing. For example; a unit assigned a DMX address of 1 may be placed anywhere in a
DMX line, at the beginning, at the end, or anywhere in the middle. When a unit is assigned a DMX
address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter
where it is located in the DMX chain.
Operating Instructions
Operating Modes: You can use the unit in 3 ways:
●
Auto Mode-The unit will automatically chase through the different colors.
●
DMX control mode
–
This function will allow you to control each individual units traits with a
standard DMX 512 controller.
●
Master-slave mode
–
One unit will work as the master in the one of the above three modes, other
units in the chain will work in synchronization towards the master.
DMX Mode:
Operating through a DMX controller give the user the freedom to create their own
programs tailored to their own individual needs. This function also allows you to use your units as spot
lights.
1. This function will allow you to control each individual unit
‟
s traits with a standard DMX 512
controller.
2. The unit 4/7/24/62 DMX channels mode
to operate. Please see “DMX Values and Functions” for
the DMX traits.
3. To run your unit in DMX mode, plug in the unit via the XLR connections to any standard DMX
controller. Set your desired DMX address following the setup specifications that come with your
DMX controller.
Touch Buttons
There are four touch buttons under the LED display: Menu, Down, Up,
Enter.
Press Menu to activate the main menu. Presses Up/Down to choose the
option you want.
Press Enter to enter the selected option. Press Enter again to enter a sub-option.
When a dot is blinking at the bottom-right corner of a parameter, the parameter is ready for setting;
Press Up/Down to increase/decrease the value; Press Enter to confirm and switch to the setting of
next parameter or return to the main menu.
LED Display
Option
Sub-option
Value
Functions
No
。
d*
1-4
To set the channel mode.
No
。
d1: 4CH;
No
。
d2: 7CH;