Once the hardware has installed, there is no need to make any
settings for the allocated COM port…the software takes care of all
this at run time
Start the USBscope50 software and you will see the following
display:
To find out what the various buttons and knobs do, simply hover
over them for a brief explanation.
3.2 Linux Ubuntu
Elan USB Test & Measurement equipment consists of 4 different
USB devices USBscope50, USBwave12, USBcount50 and
USBpulse100. These devices all use SiLabs driver, cp2101.c, which
is included in the kernel. When you plug Elan USB device if driver
is loaded the red led on the device will come on. If LED is off, it is
most likely because these 4 lines are missing from the cp2101.c file:
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50
{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12
{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100
{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50
17
You may be prompted to alter the COM port number…please follow the on-screen instructions.
Elan Digital Systems Ltd.
29
USBscope50 USER’S GUIDE Iss8
