ELAD SP-1A
User Manual - Rev 2 - 05/2021
© 2021 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated
in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
3
Noise reduction
When mode 3 is selected, keep pressed the
MODE
button for about 1 second actives the
noise reduction adjustment function. The LEDs start to blink (excepted the MUTE LED),
pressing the
MODE
button allows to choose one of the 5 level of noise reduction. The levels
are marked as follows :
Level 1 Level 2 Level 3 (default) Level 4 Level 5
To exit from the noise reduction adjustment function, keep pressed the
MODE
button for
about 1 second, alternatively the function exits automatically after 30 seconds.
Packaging
The package includes :
-
ELAD SP-1A speaker,
-
3.5 mm jack cable (male ends),
-
Powerpole cable for the power supply.
Specifications
Dimensions :
-
aluminum box : 135 x 100 x 130 (mm).
Electrical specs :
-
DC power : 12 ÷ 15V (13.8V typical),
-
Audio output : 10W RMS on 4 Ohms (<1% THD),
-
Audio output : 15W RMS on 4 Ohms (typical 3% THD),
-
Audio input level : max
1.4V RMS input on 50Ω for 15W output.
