ELAD FDM-S2
User Manual Rev 1.05 10/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
15
3.2
FDM-S2 USB driver
3.2.1
FDM-S2 USB driver installation in Windows 8 and Windows 7
3.2.1.1
First driver installation
To install ELAD FDM-S2 driver, connect FDM-S2 sampler to a USB 2.0 socket on PC to power on the
device. When Windows detects the new hardware, follow the steps listed below to install driver
correctly:
Open
Control Panel
from
Start
menu, select “System” and “Device Manager”. Expand “Other Devices”
node: the system reads FDM-S2 firmware version named as FDMS2 USB FW 2.X.
Select FDMS2 USB FW 2.5, right click on it and execute “Update driver software”.
