background image

INTRODUCTION

Congratulations on your purchase of these fine loudspeakers and welcome to the ELAC family. Ever since we 
started in 1926, we have striven to create the very best products available. Our passionate team members are 
always looking for ways to improve your listening enjoyment. We thank you for making this choice.

These ELAC Integrator Series In-Wall speakers are designed to accurately reproduce the full range of music 
and film sound, while requiring absolutely no floor space. This compact format is ideal for applications where 
traditional loudspeakers would be impractical or impossible. In-Wall speakers are ideal for Surround Sound 
applications, anywhere space is a consideration, or to bring music into additional rooms of the house.

Please take a few minutes to carefully read this manual before you get started. Also, be sure to keep this manual 
in a safe place should you need to refer to it in the future.

The information contained in this manual is applicable to these six ELAC models

IW-V61-W

 Integrator Series 6.5” In-Wall Speaker

This speaker is perfect for most applications for Home Theater & Music, providing extremely accurate 
reproduction of the entire frequency range.

IC-V61-W

 Integrator Series 6.5” In-Ceiling Speaker

This speaker is perfect for installation in ceilings and provides the same exceptional sound reproduction as its 
in-wall counterpart.

IW-VC51-W

 Integrator Series Dual 5.25” In-Wall Center Speaker

This speaker is perfect for the exceptional reproduction of the dialogue in a TV broadcast, music, and the 
complex requirements of the Center Channel in a Home Theater system.

IC-VT61-W

 Integrator Series 6.5” Home Theater In-Ceiling Speaker

One of the main challenges during installation is to overcome the narrow directivity of the woofer and tweeter 
by trying to aim the speaker towards the listener. Some speakers simply provide a swiveling tweeter that can be 
rotated through a narrow range to “aim” it at the listener. The typical range provided in practice produces almost 
no change in the sound balance, and does nothing to address the directivity of the woofer. The ELAC IC-DT61-W 
is designed so that both the woofer and tweeter are mounted at a 30 degree angle that allows the sound to be 
better directed toward the listening area.

 

IC-V31-W

 Integrator Series 3.8” In-Ceiling Speaker

This speaker is perfect for installation in ceilings where sound is rather heard instead of seen.

IC-V81-W

 Integrator Series 8” In-Ceiling Speaker

This speaker is perfect for installation in ceilings and provides exceptional sound quality for those with 
demanding needs. 

1

Summary of Contents for Integrator Series











Reviews: