20
DS-A101-G App
WIFI SETUP
Use this setup page to configure the
DS-A101-G with your wifi network.
The page shown in
Figure 15
displays the
current status. It can display one of the
following connection status:
• not connected
•
connected to wifi
• connected to ethernet
You can use speaker connection status to
determine if wifi setup was successful.
In order to see the wifi connection, make
sure the ethernet is not connected, because
the DS-A101-G will favor the ethernet
connection over wifi connection.
To create a wifi connection do the following
steps:
1.
Chose a wifi network from the list to start
wifi setup. If the list is empty, make sure
wifi is enabled on the phone.
2.
Enter wifi network password in the
required field and press SUBMIT. See
Figure 16.
3.
Go back to wifi setup page to check the
wifi connection status.
Figure 15
DS-A101-G App -
WIFI - Current status display
Figure 16
DS-A101-G App -
WIFI - Password Submit
