ELAC AIR-X, Operating Instructions Manual, Page: 39 / 48

39
Examples of different configurations
Simple stereo setup
Example 1: The transmitter is located close
to your music system; the loudspeakers
are positioned on the opposite side of
the room. You want to avoid using long
cables.
Example 2: You are using the wireless
loudspeakers as rear speakers (or effect
speakers) in a surround system and want
to eliminate the long cables.
Two separate stereo setups
Example: The transmitter is located close
to your music system; the main loud-
speakers are positioned in the seating
area. A second pair of loud-speakers is
located in the dining area. The two loud-
speaker pairs are set to different ROOMs
and can therefore play sounds from dif-
ferent sources (e.g. sound from the TV in
the seating area, radio in the dining area)
and their volume settings can be adjusted
independently.
Three separate stereo setups
Example: Similar to the above example,
but with three sepa-rate stereo pairs.
Each pair can play sound from a different
source, e.g. TV sounds in the seating area,
radio in the dining area, and an Internet
radio stream in the children’s room.