ELABO G1-1, Operating Instructions Manual

Page: 111 / 135

111
12. INPUT/OUTPUT TEST STEPS
12.4.3 Digital Inputs (Input)
The state of digital inputs can be 1 (on) or 0 (off). Digital inputs can be
used for monitoring of switches / digital outputs, etc. (note to the input
voltage - see chapter 6.2.6). Corresponds the state of the input not the
expectation on the definitions, the unit displays "Error" and waits for user
input.
Choose "digital inputs - Change"
The display will show all digital inputs.
Activate one or more digital inputs by touch to the button. The query of
the digital input is made to "on" or "off". The expected state indicates the
button.
Save the input value by using the "Save Button".
Fig. 12.16: Chose digital inputs
Fig. 12.17: Chose digital input for definition
Full-electronic G1-1 HV DC-Tester