Temperature Screening & Face Recognition Terminal User Manual
6.4.2 Port
Go to Config
Network
Port interface as shown below. HTTP port, Data port and RTSP
port can be set.
HTTP Port
: The default HTTP port is 80. It can be changed to any port which is not
occupied.
HTTPS Port
: The default HTTPs port is 443. It can be changed to any port which is not
occupied.
Data Port
: The default data port is 9008. Please change it as necessary.
RTSP Port
: The default port is 554. Please change it as necessary.
6.4.3 Server Configuration
This function is mainly used for connecting network video management system.
1. Check “Enable”.
2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Then
enable the auto report in the ECMS/NVMS when adding a new device. Next, enter the
remaining information of the device in the ECMS/NVMS. After that, the system will
automatically allot a device ID. Please check it in the ECMS/NVMS.
3. Enter the above-mentioned server address, server port and device ID in the corresponding
boxes. Click the “Save” button to save the settings.
6.4.4 DDNS
If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to Config
Network
DDNS.
37
