All disclosures, notices and warranty conditions are being written on EKWB web page. Please check terms of use. Revision 1.1. Released on 25
th
of July, 2012.
REMOVAL OF EK-TIM INDIGO XTREME:
To disassemble, loosen the water block thumb nuts. The ETI may then be removed (intact) by first slowly peeling each corner. The ETI is designed to adhesively capture excess alloy (from differences of
CPU lid/heat sink interfacial roughness and planarity) on their surfaces. Any residual adhesive on the CPU or water block may be removed with the edge of a credit card and with Xtreme Clean, acetone, or
xylene on a clean wiper or cotton cleaning swab. Residual alloy is best removed by wetting the supplied swab with Xtreme Clean and gentling rotating the swab to loosen and collect the alloy particles.
Indigo Xtreme is a single-use interface product and any removal of the water block (pre/post-reflow) will require a new ETI. All interface material and adhesive residue must be removed and
the CPU and water block re-cleaned (with the surface cleaning supplies including in the ETI kit only) prior to the re-installation of a new ETI.
REFERENCES:
Burn in program:
IntelBurnTest:
http://www.softpedia.com/get/System/Benchmarks/IntelBurnTest.shtml
Temperature monitors:
Motherboard manufacturers usually supply a hardware monitor utility for their boards. CPUID.org's HWMonitor (Pro) or SpeedFan are the most popular temperature monitoring
tool. It includes a real-time graphing mode that will aid in the monitoring of the processor burn-in:
http://www.almico.com/speedfan.php
;
http://www.cpuid.com/softwares/hwmonitor.html
The Material Safety Data Sheet (MSDS) for Indigo Xtreme Clean™ can be found at:
http://www.ekwaterblocks.com/shop/EK-TIM/MSDS_Indigo.pdf
Contact us for more information about this or other EK-TIM Indigo Xtreme applications at our website:
http://www.ekwb.com
Store EK-TIM Indigo Xtreme at room temperature conditions of 22°C (72°F) and 50% R.H., preferably in the original sealed enclosure and plastic bag.
DISCLAIMER:
EKWB d.o.o. and Enerdyne Solutions are not responsible for any damages due to external causes, including but not limited to, improper use, accident, neglect,
alteration, repair, improper installation, improper testing, or damages caused by overclocking.
Intel, Intel Core i3, Core i5 and Core i7 are trademarks of the Intel Corporation, USA.
EK-Supremacy is a trademark of EKWB d.o.o
Indigo Xtreme is a trademark of:
Enerdyne Solutions, Inc.,
125 West North Bend Way, PO Box 2660,
North Bend, WA., 98045 United States of America