ekwb EK-RES X3 D-RGB, User Manual, Page: 6 / 9

- 6 -
STEP 3
STEP 3
Once the reservoir is in place, use the enclosed 2.5mm Allen key
to tighten the hex head screw to secure the reservoir. Do not
apply too much force. Partially unscrew that same screw when
removing the reservoir.
Allen Key 2.5 mm
RECOMMENDED RESERVOIR CONFIGURATION
EK-RES X3 reservoir features five (5) G1/4 threaded Inlet/Outlet
openings on its bottom and the additional one on the reservoir top.
The top port can only be used as a fill port.
For the reservoir to function properly, one port must be used
as an Inlet and the other as an Outlet. Unused ports must be
closed with plugs using a 6mm Allen key.
M4 Holder Screw
FILL PORT
INLET /
OUTLET
PORTS
OPTIONAL
INLET / OUTLET
PORTS