ekwb EK-Quantum Vector Trio RTX 2080 Ti Installation Manual Download Page 3

Page: 3 / 3

All disclosures, notices and warranty conditions are being written on the EKWB website. Please read terms of use. Released on 20

of November, 2019. Revision 1

CONNECTING THE D-RGB LED STRIP

REQUIRED TOOLS:

scissors

Philips head screwdriver

4mm hex socket

Optional: pliers

Plug the 3-

pin connector from Water block’s D

-RGB LED light to the D-RGB_HEADER on the

motherboard. The LED will work if the pin layout on the header is as follows:

+5V G R B

Please ensure that the arrow indicated on the connector is plugged into
the +5V line as indicated on your motherboard.

Failure to do so will damage your motherboard or LED strip.

Summary of Contents for EK-Quantum Vector Trio RTX 2080 Ti

Page 1: ...s on both sides of the PCB if present REMOVING STOCK COOLER Remove all encircled screws using Phillips screwdriver All heat sink assembly screws should be removed including self adhesive washers on bo...

Page 2: ...in previous section to re attach the block In case you fail to obtain good contact please check again that your thermal pad thickness or contact our support service at http www ekwb com support STEP 4...

Page 3: ...ors Philips head screwdriver 4mm hex socket Optional pliers Plug the 3 pin connector from Water block s D RGB LED light to the D RGB_HEADER on the motherboard The LED will work if the pin layout on th...