- 9 -
Thermal Grease
STEP 1
Apply the enclosed EK-TIM Ectotherm thermal grease (thermal
compound) on the CPU heat spreader – IHS – as shown in the
image. The layer of the thermal compound must be thin and even
over the entire surface of the IHS.
The excessive or uneven application of thermal grease
may lead to poor performance!
STEP 1
APPLYING THERMAL COMPOUND
For this Step, you will need:
For this Step, you will need:
INSTALLING THE WATER BLOCK
STEP 1
REMOVING THE STOCK BACKPLATE
Carefully unscrew four (4) preinstalled backplate screws (M2.5 X 7
AX1) and remove the backplate, as shown in the picture. Save the
screws and backplate for later use.
STEP 1
M2.5 x 7 AX1 SCREWS
BACKPLATE
Phillips Head Screwdriver
