- 13 -
RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS
DRAIN PORT
CPU INLET
FILL PORT
CPU OUTLET
GPU INLET
GPU OUTLET
GPU INLET
FRONT RADIATOR
INLET or BOTTOM
RADIATOR INLET
(when the front
radiator is not used)
BOTTOM RADIATOR OUTLET or
FRONT RADIATOR OULET
(when using only the front radiator)
All ports must be used as marked in the image to complete your
loop.
The remaining unused ports must be closed with the supplied
plugs using the EK-Loop Multi Allen Key.
If one of the prescribed components will not be installed
(eg. bottom radiator or GPU water block) then one INLET
and one OUTLET port still must be joined in order for
this distribution plate to function!
Note that the bottom and front radiator are entirely optional – the
liquid cooling system without either one can be closed.
Only one INLET and one OUTLET port for the GPU
connection can be used, while all other INLET and
OUTLET GPU ports must be closed with G1/4 plugs
(enclosed in the packaging).