- 6 -
APPLYING THERMAL COMPOUND
STEP 1: CLEANING THE CHIPSET
Carefully remove the factory provided Thermal Pad from the chipset
heat spreader. Clean the chipset heat spreader by using a non-
abrasive cloth or q-tip. EKWB recommends the use of denatured
alcohol for removing leftovers.
STEP 2
STEP 1
STEP 2: APPLYING THERMAL COMPOUND
Apply thermal compound on the chipset heat spreader (as shown
on the photo) with enclosed EK-TIM Ectotherm thermal grease.
Applying too much thermal grease will have negative impact on the
cooling performance!