- 2 -
- 3 -
This product is intended for installation by expert users only.
Please consult with a qualified technician for installation.
Improper installation may result in damage to the equipment.
EK Water Blocks assumes no liability whatsoever, expressed
or implied, for the use of these products, nor their installation.
The following instructions are subject to change without
notice. Please visit our website at www.ekwb.com for updates.
Before you start using this product, please follow the basic
guidelines:
Carefully read the manual before beginning with the
installation process!
EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured with
the rubber o-ring gaskets.
The use of quality market-proven corrosion-inhibiting
coolants is always strongly recommended for any liquid
cooling system.
BOX CONTENT
EK-Quantum
Inertia D5 PWM D-RGB
Allen Key 2 mm (1 pc)
Allen Key 2.5 mm (1 pc)
MOUNTING MECHANISM
Bag content is universal; you may not need every screw.
