/ 3 /
It is of highest importance to use correct inlet and outlet port configuration. Not using
the correct ports may result in water bypassing the water blocks instead of flowing
through the water blocks.
As a result the bypassed graphics card will overheat and may get damaged
beyond repair!
CHOOSING INLET AND OUTLET PORT
No inlet
or outlet
possible
OPTIONAL*
OPTIONAL*
Serial
Terminal
Parallel
Terminal
Do not use IN and OUT on the same
terminal hole!
Summary of Contents for EK-FC Terminal X
Page 1: ...EK FC Terminal X 1st revision Aug 9th 2017 USER GUIDE...
Page 6: ...6 ATTACHING THE EK FC TERMINAL X Screw M4x28 DIN7984 OR 15x1mm gasket...
Page 11: ...11 ATTACHING THE EK FC TERMINAL DIRECT OR 15x1mm gasket EK FC Terminal Direct M4x28 DIN7984...
Page 12: ...ATTACHING THE EK FC TERMINAL ROTARY 90 OR 15x1mm gasket EK FC Terminal Rotary 90 M4x8 DIN7984...
