- 4 -
INSTALLING THE ASSEMBLY USING THE ENCLOSED
BRACKET (Bracket - XRES Classic Spider)
OPTION 1
If you have the option to mount the assembly on a 120mm fan or
120mm fan mounting holes, EK recommends the enclosed spider
mount -
Bracket – XRES Classic Spider
.
STEP 1
Use the enclosed M4 x 4mm screws to attach two brackets together,
as shown in the picture.
STEP 2
For mounting the Bracket – XRES Classic Spider to the 120mm fan
mounting holes, you can use the following:
1. self-tapping screws that are usually supplied with fans to screw
the holder directly to the fan;
2. 30mm long screws that are supplied with radiators to screw the
holder to the radiator through a 120mm fan;
3. 5mm long screws, usually supplied with radiators to screw the
holder directly to the radiator;
4. M4 × 6mm screws with M4 nuts and washers that are supplied with
the Spider Holder to mount the holder to 120mm fan mounting
holes on the chassis.
EK-Classic Pump Reservoir 160
SPC PWM D-RGB assembly
M4 × 4mm
DIN7984 screw
M4 PVC washer
Spider Holder
120 mm FAN
Bracket – XRES Classic Spider
assembly
M4 × 4mm screw
STEP 1
STEP 2